Devices & Audio
VSC Knowledgebase · Audio Enhancement EPIC
Classroom and common-area devices: MSx devices, XD mics and receivers, amplifiers, strobes, displays, ITC touch panels and volumes.
Article | What it covers | |
🚨 MS-700: Fire the EPIC Strobe on Every Intercom, Page and Notification | Wire and program the EPIC strobe to flash on every intercom, page and notification (Jacob Freilich's method) | QR-AE-001 |
Swap the pre-announce tone for pages and intercom | QR-AE-003 | |
Get a device's password from EPIC and open its web page | QR-AE-004 | |
Group rooms into zones so bells, pages and notifications reach the right part of the building | QR-AE-010 | |
Three ways to change classroom volume, from every device at once down to one room | QR-AE-011 | |
Swap an MS-700 with the Device Configuration app and push the old settings back | QR-AE-012 | |
Link teacher, student and Mic360 mics, set the media channel, charge and clean | QR-AE-013 | |
XD receiver wiring, RS-232 (TX to RX), DIP switches and EPIC setup | QR-AE-014 | |
Use SIP speakers the district already owns (EPIC 3.3+) | QR-AE-025 | |
Mount the Algo color strobe, add it to EPIC, set colors and patterns, start and stop it from events | QR-AE-026 | |
Mount, power, adopt and test InfoView clocks and signs | QR-AE-027 | |
Mount and connect an ITC, set its buttons and volume sliders in EPIC, talkback levels, and a command reference | QR-AE-029 | |
Power, speaker load, ports and bring-up for gyms and cafeterias | QR-AE-030 | |
Every port and pinout, with a pre-power checklist (training module) | QR-AE-031 | |
Which amp or interface for each space, and what replaced the MS-300, MS-320 and MS-375 | QR-AE-034 |